BURY CABLE triple copper XLPE LSZH cable is intended for fixed 600/1000V distribution where a three-conductor arrangement and halogen free sheath are specified. The range uses copper conductors, XLPE insulation, HFFR outer sheath and polyester tape.
The product illustration shows three individually sheathed conductors. Use the assembly dimensions and the flat or trefoil electrical data to plan protected trays, ducts and other approved routes. Confirm the required arrangement with BURY CABLE when ordering.
IEC 60228
IEC 60502-1
| Flame Retardance (Single vertical wire or cable test) | IEC 60332-1-2; EN 60332-1-2 |
| Reduced Fire Propagation (Vertically-mounted bundled wires & cables test) | IEC 60332-3-24; EN 60332-3-24 |
| Halogen Free | IEC 60754-1; EN 50267-2-1 |
| No Corrosive Gas Emission | IEC 60754-2; EN 50267-2-2 |
| Minimum Smoke Emission | IEC 61034-2; EN 61034-2 |
600/1000V
Conductor : Flexible copper, class 2.
Insulation : Cross linked polyethylene XLPE.
Outer Sheath : Halogen free thermoplastic compound HFFR.
Outer Sheath Option : UV resistance, hydrocarbon resistance, oil resistance, anti-rodent and anti-termite properties can be offered as option.
Tape : Polyester tape.
Insulation Colour : Natural.
Sheath Colour : Black, red and white or black, red and blue.
Maximum temperature range during operation : 90°C
Maximum short circuit temperature (5 Seconds) : 250°C
Overload maximum core temperature : 130°C
| Conductor | FLP600-RZ1-R / N2XOH | |||||
|---|---|---|---|---|---|---|
| No. of Cores × Cross- sectional Area | Conductor Class | Conductor Diam | Min. Insulation Thick | Min. Outer Sheath Thick | Approx. Overall Diameter | Approx. Weight |
| No.×mm² | mm | mm | mm | mm | kg/km | |
| 10 | 2 | 4.1 | 0.7 | 0.9 | 7.7×22.7 | 393 |
| 16 | 2 | 5.3 | 0.7 | 0.9 | 8.8×26.0 | 565 |
| 25 | 2 | 6.6 | 0.9 | 0.9 | 10.5×31.2 | 845 |
| 35 | 2 | 7.8 | 0.9 | 0.9 | 11.7×34.8 | 1127 |
| 50 | 2 | 9.3 | 1.0 | 0.9 | 13.5×40.2 | 1571 |
| 70 | 2 | 11.3 | 1.1 | 1.0 | 15.8×47.1 | 2171 |
| 95 | 2 | 12.8 | 1.1 | 1.0 | 17.4×51.9 | 2769 |
| 120 | 2 | 14.5 | 1.2 | 1.1 | 19.5×58.2 | 3550 |
| 150 | 2 | 16.2 | 1.4 | 1.2 | 21.8×65.1 | 4286 |
| 185 | 2 | 18.0 | 1.6 | 1.2 | 24.0×71.7 | 5214 |
| 240 | 2 | 20.7 | 1.7 | 1.2 | 26.9×80.4 | 6813 |
| 300 | 2 | 23.2 | 1.8 | 1.3 | 29.9×89.3 | 8419 |
| 400 | 2 | 26.5 | 2.0 | 1.5 | 34.0×101.6 | 11109 |
| 500 | 2 | 30.3 | 2.2 | 1.6 | 38.5×115.1 | 14387 |
Conductor operating temperature : 90°C
Ambient temperature : 30°C
| Conductor Cross- sectional area | Max. DC Resist. Cond. 20°C | Perm. Current Buried/Duct 20°C | Perm. Current Rating In Air 30°C - flat formation | Current Rating In Air 30°C - trefoil | Nominal Capacitance |
|---|---|---|---|---|---|
| mm² | Ohm/km | A | A | A | pF/m |
| 10 | 1.91 | 58 | 77 | 74 | 445 |
| 16 | 1.21 | 75 | 105 | 101 | 593 |
| 25 | 0.78 | 96 | 141 | 135 | 549 |
| 35 | 0.554 | 115 | 176 | 169 | 637 |
| 50 | 0.386 | 135 | 216 | 207 | 682 |
| 70 | 0.272 | 167 | 279 | 268 | 750 |
| 95 | 0.206 | 197 | 342 | 328 | 840 |
| 120 | 0.161 | 223 | 400 | 383 | 873 |
| 150 | 0.129 | 251 | 464 | 444 | 843 |
| 185 | 0.108 | 281 | 533 | 510 | 803 |
| 240 | 0.0801 | 324 | 634 | 607 | 866 |
| 300 | 0.0641 | 365 | 736 | 703 | 916 |
| 400 | 0.0486 | 426 | 868 | 823 | 944 |
| 500 | 0.0384 | 481 | 998 | 946 | 983 |
14 Class 2 copper sizes from 10 to 500 mm².
XLPE insulation, HFFR sheath and polyester tape.
Sheath colour combinations: black/red/white or black/red/blue.
90°C maximum operation; 250°C short circuit for 5 seconds.
Tables include DC resistance, buried/duct and in-air current data, and nominal capacitance.
Confirm the three-conductor assembly layout, dimensions and termination space before ordering.
Use the electrical column for the route: buried/duct at 20°C, or air at 30°C in the stated flat or trefoil formation. Confirm installation correction factors.
The 130°C overload figure is a separate short-term condition; request the permitted duration and duty from BURY CABLE.
This is an unarmoured product. The additional single-core armoured illustration is a series reference; specify external route protection and the installation bending requirement.
The main illustration shows three individually sheathed conductors. Confirm the required assembly and dimensional drawing with BURY CABLE.
The table lists Class 2 copper for fixed installations. For repeated movement, request a cable designed for that duty.
Use the column matching the burial or air condition and cable formation, then confirm the complete installation design.
UV, oil, hydrocarbon, rodent and termite protection can be specified as options and confirmed in the supply specification.
Send conductor size, circuit arrangement, run lengths, environment, sheath colours, installation method and project standards.
